Direction To use vacuum cleaner 1. Remove electrical cord and literature from recovery tank. Fill solution tank2. Plug cord into grounded outlet. Be sure dome is seated on recovery tank,and float shut-off is installed correctly.3. Adjust brush to proper setting. For good operation, it must skim the carpet. If circuit breaker trips, raise brush to prevent damage to motor or carpet4. Turn on brush and vacuum motor switches(“ON”=“I”). Turn on solution switch for continuous spray or set switch to intermittent to allow use of trigger switches 5. Adjust handle to comfortable operatingposition. Tip machine back by main handle to move to starting point.6. Lower machine to floor and start moving the brush on the carpet. What should we do before adjusting the handle?

Direction To use vacuum cleaner 1. Remove electrical cord and literature from recovery tank. Fill solution tank2. Plug cord into grounded outlet. Be sure dome is seated on recovery tank,and float shut-off is installed correctly.3. Adjust brush to proper setting. For good operation, it must skim the carpet. If circuit breaker trips, raise brush to prevent damage to motor or carpet4. Turn on brush and vacuum motor switches(“ON”=“I”). Turn on solution switch for continuous spray or set switch to intermittent to allow use of trigger switches 5. Adjust handle to comfortable operatingposition. Tip machine back by main handle to move to starting point.6. Lower machine to floor and start moving the brush on the carpet. What should we do before adjusting the handle?

1. Lower machine to floor
2. Adjust brush to proper setting
3. Plug cord into grounded outlet
4. Turn on brush and vacuum motor switches
5. Semua jawaban benar

Jawaban yang benar adalah: D. Turn on brush and vacuum motor switches.

Dilansir dari Ensiklopedia, direction to use vacuum cleaner 1. remove electrical cord and literature from recovery tank. fill solution tank2. plug cord into grounded outlet. be sure dome is seated on recovery tank,and float shut-off is installed correctly.3. adjust brush to proper setting. for good operation, it must skim the carpet. if circuit breaker trips, raise brush to prevent damage to motor or carpet4. turn on brush and vacuum motor switches(“on”=“i”). turn on solution switch for continuous spray or set switch to intermittent to allow use of trigger switches 5. adjust handle to comfortable operatingposition. tip machine back by main handle to move to starting point.6. lower machine to floor and start moving the brush on the carpet. what should we do before adjusting the handle Turn on brush and vacuum motor switches.

Pembahasan dan Penjelasan

Menurut saya jawaban A. Lower machine to floor adalah jawaban yang kurang tepat, karena sudah terlihat jelas antara pertanyaan dan jawaban tidak nyambung sama sekali.

Menurut saya jawaban B. Adjust brush to proper setting adalah jawaban salah, karena jawaban tersebut lebih tepat kalau dipakai untuk pertanyaan lain.

Menurut saya jawaban C. Plug cord into grounded outlet adalah jawaban salah, karena jawaban tersebut sudah melenceng dari apa yang ditanyakan.

Menurut saya jawaban D. Turn on brush and vacuum motor switches adalah jawaban yang paling benar, bisa dibuktikan dari buku bacaan dan informasi yang ada di google.

Menurut saya jawaban E. Semua jawaban benar adalah jawaban salah, karena setelah saya coba cari di google, jawaban ini lebih cocok untuk pertanyaan lain.

Kesimpulan

Dari penjelasan dan pembahasan serta pilihan diatas, saya bisa menyimpulkan bahwa jawaban yang paling benar adalah D. Turn on brush and vacuum motor switches.

Jika anda masih punya pertanyaan lain atau ingin menanyakan sesuatu bisa tulis di kolom kometar dibawah.